Frame

Table system without ribs or any other horizontal support elements (wheelchair access), tapered square-shaped table legs made from beech wood, cross section 55/55 mm on top and 40/40 mm at the bottom, directly connected to the table top at 5 screwing points.

Frame surfaces

Wooden parts beechwood, varnished with UV-hardened, low solvent water paint.

Table tops

Plate C: 30 mm thick, high-quality multi-layer plywood plate E1, top surface optionally covered with HPL plastic or wood veneer according to the BRUNE^® collection. Lower surface white HPL or beech veneer. Straight edge, 2 mm thick, in material to match table top (plastic for plastic, veneer for veneer).

Plate D: 30 mm thick, 28 mm thick high-quality multi-layer plywood plate E1, top surface optionally covered with HPL plastic or wood veneer according to the BRUNE^® collection. Lower surface white HPL or beech veneer. Edge with solid beechwood edge band, smooth finish, 9 mm thick.

Plate E: 30 mm thick, 28 mm high-quality multi-layer plywood board E1, coated in high-pressure laminate (HPL) or veneer according to the BRUNE^® collection. Lower surface: white HPL or beech veneer.

Edge: solid beech edge band, crowned, 9 mm thick.

Veneer finish

Real wood veneer from the BRUNE^® collection comes as a standard varnished with a low solvent content water-based lacquer, optionally stained to the BRUNE^® collection.

HPL surfaces

Resopal^®-HPL from the BRUNE^® collection.

Gliders

Optionally: Plastic or felt gliders, or gliders with metal caps.

Dimensions

Table height: 75 cm

Rectangle:

• 70x70 cm: 15 kg

• 120x70 cm: 23 kg

• 140x70 cm: 26 kg

• 160x70 cm: 29 kg

• 80x80 cm: 18 kg

• 120x80 cm: 25 kg

• 140x80 cm: 29 kg

• 160x80 cm: 33 kg

Trapezoid:

• 140x70x61 cm: 18 kg

• 160x80x69 cm: 22 kg

Semi-circle:

• Ø 140 cm: 21 kg

• Ø 160 cm: 26 kg

Round:

• Ø 100 cm: 21 kg

• Ø 120 cm: 28 kg